Step 1: Pour various functional raw materials into a high-speed mixer in precise proportions for uniform blending.
- Polyester resin: As the core binder of toner, it is responsible for bonding other components together and adhering to paper during fusing.
- Silicon: Usually added in the form of silicone oil or silane coupling agent to improve the fluidity and anti-caking properties of toner.
- Charge control agent: A key factor determining the charging performance of toner, ensuring that toner accurately adheres to the photosensitive drum during development.
- Carbon black: As a colorant, it gives toner a black tone and adjusts optical density.
Under the action of rotating stirring paddles, these raw materials are fully mixed to form a uniform pre-mixed material, laying the foundation for subsequent processes.
Step 2: Melting and Forming
The mixed materials enter the melt kneader and go through the processes of high-temperature melting, tablet curing and preliminary crushing.
- High-temperature melting: At a high temperature of 100-150°C, the polyester resin gradually melts, uniformly wrapping other solid particles to form a viscous melt. During this process, the molecular structure of the raw materials is cross-linked to ensure stable subsequent forming.
- Tablet curing: The molten material is pressed into thin sheets of uniform thickness by a pressure device, then enters the cooling conveying pipeline, and solidifies rapidly under the action of circulating cooling water.
- Preliminary crushing: The solidified sheets are hard but brittle. They are first crushed by a coarse crusher into particles of several millimeters in size. These particles are transported to the next link through a closed pipeline to avoid impurity pollution.

Step 3: Secondary Crushing (Airflow Pulverization)
The initially crushed particles enter the airflow pulverization system for more precise crushing.
- Transport to the crushing tank: The initially crushed particles are transported to the high-pressure crushing tank by the air pump of the air compressor.
- High-pressure airflow crushing: The high-strength and high-pressure gas generated by the air compressor (usually with a pressure of 0.6-0.8MPa) forms a high-speed airflow in the tank, driving the particles to move at high speed. In the closed crushing tank, particles collide, rub and shear violently with each other and the tank wall, achieving secondary ultra-fine crushing. This airflow crushing method is gentler than mechanical crushing, which can reduce the damage to the internal structure of particles. At the same time, the particle fineness can be initially adjusted by controlling the airflow speed.
Step 4: First Classification and Screening
The particle size of the particles after secondary crushing varies greatly. A coarse screening device is used for the first classification, mainly to remove large particles with a particle size exceeding 20 microns.
Step 5: Second Classification and Screening
A precision airflow classifier is introduced for the second classification. By utilizing the difference in sedimentation speed of particles with different particle sizes in the airflow, intermediate products of 10-15 microns are screened out to further improve the uniformity of particles.

Step 6: Third Classification and Screening
This is the final quality control link. Through real-time monitoring by a laser particle size analyzer, it is ensured that the particle size of toner particles attached with silica (enhancing charging stability) is strictly controlled at 8-10 microns. At this point, the initial processing of toner is completed, and subsequent performance testing and adjustment are required.
The result will be premium toner!





